.red {color#F00;font-weightbold;}Features:Intelligent charger designed for 16 cell LiFePO4 battery packs. CPU control and pulse width modulation (PWM) technology, charging current and output voltage is controlled accurately to ensure fully-charged and avoid over-charging. Built-in cooling fan to ensure charger long service life. Safety protection Over Voltage ProtectionShort Circuit ProtectionOutput Reverse ProtectionCharging time Charging Time= (1.41 * Ah rate of the pack) / 5A charge currentBuilt-in IC to cut-off power automatically when battery is fully charged. LED indicators LED 1 = Red = Power OnLED 2 = Red = ChargingLED 3 = Green = Fully Charged User Instructions Check the output plug of this charger and make sure it is not loose.Before charging, please connect the charger’s alligator clips to battery firstthe "red" clip connects to the POSITIVE pole and the "black" connects to the NEGATIVE pole. After, connect the input power plug to the indoor power supply.The charger applies the intelligent charging method of constant current and constant voltage. The charger will automatically shut off when battery is fully charged. Unplug the input power supply then disconnect the output clips.When charger is not in use or finished charging, be sure to unplug input power supply.Indictor LED instruction "Charging" indicator shows "red" under normal charging state. It turns into "Green" when the battery is fully charged, the battery can be put into use at this time.The charging voltage of this charger is 58.4V, and shut-off current is .5A. It can only be operated when connect with not fully charged battery. Includes Battery Charger Power Cable ManualTechnical Specifications:Item 16 Cell 58.4V (48V) 5A Charger Model TN4805AL Max Output Power 240W Output Voltage 58.4V ??0.02Vdc Output Current 5A Rated Input Voltage 110Vac Input Voltage AC90-135V Constant Voltage 58.4V??0.5V AC Input Voltage Frequency 5060 Hz Constant Current 5A??0.5A Constant Voltage 58.4 Vdc, 5AShut-off Current 0.5A Power Efficiency 90% (Vin=110Vac, rated load) Over Voltage Protection YES Software Over Voltage Protection The charger software limits the maximum output voltage to a level suitable for the connected battery system Thermal Protection N/A Current Limiting Protection YES (At CC Mode) Reverse Polarity Protection When output wires are reversely connected to the battery the chargerwill not operate and will work normally when DC wires are correctlyconnected Electric Strength Test Input-Output 1500Vac/10mA/1 min (No Breakdown) Isolation Resistance Input-ground 10m@500Vdc Isolation Resistance Output-ground 10m@500Vdc Leakage Current <3.5mA Safety CE/UL Compliant High Temperature Ambient Operating +40??C Low Temperature -10??C High Temperature Storage +70??C (Normal after recovery under normal temperature for 2 hours) Low Temperature Storage +40??C (Normal after recovery under normal temperature for 2 hours) Random Vibration 20Hz to 2000Hz 3 Grms 20 hours per axis Repetitive Shock 40g peak 3 orthogonal axes, 3+ and 3- in each axis, 11ms pulse width Thermal Shock -35??C to 75??C, <3min transition, 2.5 hours dwell, 200 cycle Drop Test BS EN60068-2-32:1993 TEST EDfree fall appendix B AC Wire Length 1.5 m length DC Wire Length 1.5 m length Dimensions 173mmX88mmX62mm (L*W*H) Net Weight 1.2Kg Output Connector Type XLR Connector Casing Aluminum The charger has been calibrated to take account of thevoltage drop in the DC output cables during operation, to prevent thepossibility of over or under charging of the battery it is recommendedthe DC output cables are connected directly to the battery withoutmodification. Warning:Only for use with LiFePO4 16 cell battery pack (If used with batterypack of less cells it will cause damage to battery and possible personal injury mayoccur). Unplug charger after use. To prevent electrical shock, DO NOT remove casing. Be careful of high-voltage inside charger. If failure happens, please contact us. Users and non-professional technicians are prohibited to open the charger! Keep charger out of children’s reach. The charger and battery belongs in indoor environment with good ventilation and good cooling system, Do not expose to humid, high temperature, flammable, explosive gas environments. Do not bring charger along during transportation to prevent shock damage! Read the instructions carefully before using.Damage caused by improper use is not covered by warranty.
Click To View Deal